#esp32
66 open-source ESP32 project guides tagged #esp32: build steps, hardware and firmware.

ESP32 ST7789 Example: Drive the Display with ESP-IDF esp_lcd
Step-by-step ESP32 ST7789 example using the ESP-IDF esp_lcd driver: SPI bus setup, panel IO config, esp_lcd_new_panel_st7789, verification and common mistakes.

ESP32 Wi-Fi and Bluetooth Module: What It Is and How to Start
Plain-English guide to the ESP32 Wi-Fi and Bluetooth module: chips vs modules, how both radios share one antenna, how to get started and pitfalls to avoid.

ESP32 DevKit V1: What It Is and How to Get Started
DOIT ESP32 DevKit V1 is built on the ESP32-WROOM module. Learn setup with Arduino IDE or ESP-IDF, pinout basics, and how to avoid common pitfalls.

ESP32 Specs: Complete Reference Guide for Makers
ESP32 specs reference: 240 MHz CPU, 600 DMIPS, 12-bit ADC, Wi-Fi, BLE 4.2–6.x support tables, external flash notes, gotchas, and safe usage tips.

ESP32 DAC Example: Output Analog Voltage Step by Step
Learn how to use the ESP32's built-in 8-bit DAC on GPIO25 and GPIO26 with ESP-IDF. Covers one-shot, continuous DMA, and cosine wave modes.

ESP32-WROOM: How to Program It Step by Step
Learn how to program the ESP32-WROOM module using Arduino IDE or MicroPython. Covers drivers, esptool, boot mode, and common upload errors.

ESP32 vs ESP32-S2: Key Differences and Which to Choose
Compare ESP32 and ESP32-S2 on CPU cores, USB OTG, GPIO count, and peripherals to pick the right Espressif chip for your next project.

ESP-IDF Examples: How to Find, Build, and Run Them
Step-by-step guide to finding, building, and flashing ESP-IDF example projects on ESP32, covering hello_world, Bluetooth, build setup, and common errors.

ESPHome PC Power Control with ESP32 and Home Assistant
Control your PC's power button remotely via Home Assistant using an ESP8266 or ESP32 wired to your ATX motherboard's front-panel header.

ESP32-CAM Module: What It Is and How to Get Started
Practical guide to the ESP32-CAM module: key specs, wiring for flashing, common pitfalls, and project ideas drawn from real source data.

ESP32 Home Assistant Projects: Ideas for Every Skill Level
Curated ESP32 Home Assistant project ideas grouped by theme: sensors, displays, voice satellites, and hardware integration — for beginners and advanced makers.

ESP32 Web Server Example: Step-by-Step Setup Guide
Build a working ESP32 web server in Arduino IDE with ESPAsyncWebServer. Full example code, verification steps, periodic refresh, and common mistakes explained.

ESP32 LoRa Example: Send & Receive Messages Step-by-Step
Upload a sender and receiver sketch to two Heltec ESP32 LoRa boards, set the right frequency band, and watch packets arrive in the serial monitor.

ESP32 Bluetooth Example: BLE Scanner Step-by-Step
Run your first ESP32 Bluetooth example in Arduino IDE. Covers BLE scanner code, BluetoothSerial, RSSI, common mistakes, and what Bluetooth modes the ESP32 supports.

ESP32 TFT Display Example: Step-by-Step Setup Guide
Wire an ESP32 to a TFT display over SPI or 8-bit parallel, install the right library, and run your first display code — with verification steps and common mistakes.

ESP32 Camera Example: Step-by-Step Setup Guide
Set up an ESP32 camera module from scratch: install the driver, configure AI Thinker pins, capture JPEG frames, and dodge the most common pitfalls.

ESP32 OTA Example: Update Firmware Over Wi-Fi Step-by-Step
A practical ESP32 OTA tutorial: partition setup, HTTPS OTA example code, rollback safety, and the most common mistakes to avoid.

ESP32 MicroPython Examples: Step-by-Step Setup Guide
Learn ESP32 MicroPython with hands-on examples: connect I2C sensors, stream I2S audio, and call web APIs. Covers tools, wiring, and common mistakes.

ESP32 Display Example: Connect and Drive a Screen Step-by-Step
Wire a display module to ESP32, pick the right library, write example code, and flash it—covering SPI e-paper and TFT panels with verified steps.

ESP32 Servo Example: Control RC Servos Step-by-Step
Control an RC servo with ESP32 using the ServoESP32 library or MCPWM. Full code, wiring, the S2/S3/C3 frequency fix, and common mistakes.

ESP32 OLED Example: Display Text and Graphics Step-by-Step
Wire an SSD1306 OLED to your ESP32 over I2C, install the ThingPulse driver, and display text and graphics with this step-by-step tutorial.

ESP32 LED Example: Blink and PWM Dimming Step-by-Step
Learn the ESP32 LED example from a basic blink to PWM brightness control using the LEDC peripheral, with wiring tips, code, and common mistakes.

ESP32 MQTT Example: Publish & Subscribe Step-by-Step
Step-by-step ESP32 MQTT tutorial covering setup, publish, subscribe, relay control, and common mistakes using ESP-IDF and Mongoose OS examples.

ESP32 Examples: Step-by-Step Setup and Run Guide
How to find, configure, flash, and verify ESP32 examples using ESP-IDF. Covers blink, WiFi softAP, HTTP server, TCP client, and combining projects.

ESP32 Deep Sleep Not Working: Troubleshooting Guide
Fix ESP32 deep sleep issues step by step: board won't sleep, won't wake up, or draws too much current. Covers all wakeup sources and chip variants.

Robot Actuator ESP32 v8: Build a Smart 6-Axis Robot Arm Joint
Build a self-contained ESP32-powered actuator for a 6-axis robot arm. Includes custom PCB, 3D-printed parts, DRV8825 stepper driver, and Lua firmware.

Dsn AI Voice Assistant v2: ESP32-C3 Build Guide
Build a pocket-sized AI voice assistant with ESP32-C3, INMP441 mic, MAX98357A amp, and Hugging Face cloud AI. Streams WAV audio in real time.

AmbiSense: Build a Radar-Controlled LED System with ESP32
Build AmbiSense: a privacy-safe radar-LED system using ESP32 and LD2410. No cameras — just responsive ambient lighting controlled by proximity and movement.

EnergyMe-Home: Build a 16-Channel ESP32 Energy Monitor
Build EnergyMe-Home, an open-source ESP32-S3 smart energy meter that monitors up to 16 circuits with MQTT, Home Assistant, InfluxDB and REST API.

PadSpan HA: BLE Room-Presence Tracking for Home Assistant
Turn ESP32 boards into a full BLE room-presence system with 3D floor plans, calibration, phone tracking, and 19 views in Home Assistant.

ESP32 AI Monitor: Desk Display for Claude, ChatGPT and More
Turn a Cheap Yellow Display into a live AI usage dashboard for Claude, ChatGPT, Gemini, Copilot and Cursor — no Wi-Fi needed, just USB serial.

ESPHome Weather Station: Build a Solar-Powered ESP32 Weather Station
Build a full outdoor weather station with wind, rain, temperature, and solar monitoring using ESP32 and ESPHome. Integrates directly with Home Assistant.

OTA Update STM32 Over-the-Air Using ESP32
Use an ESP32 as a wireless programmer to flash STM32Fxx and STM32Gxx MCUs over-the-air via a browser-based file server.

esphome-devices: 12 Ready-to-Adopt ESPHome Configs for ESP32
Voice assistants, e-paper calendars, LVGL touch dimmers and HUB75 matrices — real running ESPHome configs with honest notes on what works.

BambuHelper: ESP32 Real-Time Monitor for Bambu Lab Printers
Flash BambuHelper onto an ESP32 to get a live color TFT dashboard for your Bambu Lab printer — temps, progress, AMS, fans, and HMS errors over MQTT.

ESPHome Touch Panel: CYD Home Assistant Display with LVGL UI
Turn the Cheap Yellow Display into a wall or desk Home Assistant control panel using ESPHome, LVGL tiles, and 3D-printed mounts.

TamaFi: Build a WiFi-Enabled Virtual Pet with ESP32-S3
Build TamaFi, an open-source WiFi-aware virtual pet on ESP32-S3 with a 240×240 color TFT, NeoPixels, and an autonomous behavior engine.

Batear: Build an Acoustic Drone Detector with ESP32-S3
Build Batear, an open-source edge-only drone detector using an ESP32-S3 and MEMS mic. LoRa or Ethernet alerts, Home Assistant integration, MIT licensed.

micropython-samples: MicroPython Toolkit for ESP32 Makers
Explore Peter Hinch's micropython-samples: a curated library of MicroPython utilities, drivers, and code patterns for ESP32, ESP8266, and Pyboard builds.

SpotMicroESP32: Build a 3D-Printed Quadruped Robot with ESP32
Step-by-step guide to building SpotMicroESP32, a supportfree 3D-printed four-legged robot dog powered by an ESP32-DevKitC with 12 servos, sensors, and a camera.

boardsmith: Text Prompt to KiCad Schematic and ESP32 Firmware
Turn a plain-English description into a wired KiCad schematic, BOM, and ESP32 firmware in seconds — no templates, real computed values.

awesome-esp32: Hand-Picked ESP32 Projects Worth Building
A curated, device-tagged list of 40+ ESP32 projects across AI companions, displays, games, robots and radio — with guides to get you building fast.

WLED Wemos Shield: Build a Wi-Fi LED Controller for ESP32
Turn a Wemos D1 Mini into a full-featured Wi-Fi LED controller with the open-source WLED Wemos Shield PCB. Level shifter, relay, OLED, and more.

esp32-homekit-camera: Native Apple HomeKit IP Camera Build
Flash your ESP32-CAM module with open-source firmware and add a native Apple HomeKit IP camera to your Home app in minutes.

ESP32 Voice Assistant with Gemini, Whisper and Piper TTS
Build a talking AI assistant on ESP32 using Faster-Whisper for speech recognition, Gemini 2.5 Flash for responses, and Piper TTS for natural voice output.

ESP32 Web Radio & Bluetooth Speaker with MP3 Decoder
Build an ESP32 internet radio and Bluetooth speaker that decodes MP3 and AAC streams over Wi-Fi and outputs audio via I2S codec or built-in DAC.

MicroPython ESP32 psRAM LoBo: Build Firmware with 4MB RAM
Build feature-rich MicroPython firmware for ESP32 psRAM boards. Unlocks 4MB heap, TFT display, MQTT, FTP, SSH, GSM and OTA updates with the LoBo port.

Rotary Phone Voice Assistant with ESP32 and Home Assistant
Turn a vintage Siemens W48 rotary phone into an OpenAI-powered voice assistant using ESP32 and ESPHome. Lift the handset, speak, get answers.

IKEA OBEGRÄNSAD ESP32 Hack: Turn a Lamp into a Smart LED Canvas
Replace the stock controller in an IKEA OBEGRÄNSAD lamp with an ESP32 for Wi-Fi pixel art, 20+ plugins, a REST API, and Home Assistant support.

micropython-camera-driver: OV2640 Camera on ESP32
Add OV2640 camera support to MicroPython on the ESP32-CAM, M5Camera or T-Camera Mini. Flash prebuilt firmware and start capturing in minutes.

ESPHomeDesigner: Visual Drag-and-Drop ESP32 Display Editor
Design custom dashboards for ESP32 E-Ink, OLED, and LCD displays without writing display code. Runs inside Home Assistant or as a standalone web app.

CircuitSetup Expandable 6-Channel ESP32 Energy Meter Guide
Flash ESPHome to the CircuitSetup 6-channel ESP32 energy meter, wire CTs to your panel, and track real-time power in Home Assistant.

ESP32MCPServer: Connect AI Agents to Real-World Sensors
Build an MCP server on ESP32 that lets AI assistants query live I2C sensors, NMEA GPS, NMEA 2000 marine bus, and OBD-II car diagnostics over WebSocket.

ESP-FC: Build Your Own ESP32 Flight Controller
Flash open-source ESP-FC firmware onto an ESP32, wire up a gyro and ESCs, and configure your DIY quadcopter with Betaflight Configurator.

Build Smart Interfaces on M5Stack with M5ez
Learn to build responsive UI applications on M5Stack ESP32 using M5ez interface builder library. Create menus, buttons, text input and WiFi apps.

Home Assistant Glow: ESP32 Energy Monitor Build Guide
Turn any electricity meter's pulse LED into real-time energy data in Home Assistant using an ESP32, ESPHome, and the Home Assistant Glow project.

ESPHome Fan Controller: PID Smart Fan for ESP32
Build a whisper-quiet thermostat-controlled 12V fan with ESP32, ESPHome, and PID control. No coding needed — just one YAML file and Home Assistant.

ESPTimeCast: Build a WiFi LED Matrix Clock and Weather Display
Build ESPTimeCast on ESP8266 or ESP32 with a MAX7219 LED matrix. Flash from your browser in minutes — no IDE needed. Shows live time and weather.

Embedded-AI-Harness: AI Closed-Loop Firmware Dev for ESP32
Let Claude write, flash, and test ESP32 firmware on real hardware in a closed loop — spec to working silicon, hands off. Built on a Raspberry Pi testbench.

NightDriverStrip: ESP32 LED Effects Firmware Build Guide
Flash NightDriverStrip to an ESP32 and drive WS2812B or HUB75 LEDs with audio-reactive effects, WiFi control, and a live web UI.

Flix: Build an Open-Source ESP32 Quadcopter from Scratch
Build Flix, an open-source ESP32 quadcopter with clean Arduino firmware, MAVLink over Wi-Fi, Gazebo simulation, and a Python scripting library.

zclaw: Personal AI Assistant on ESP32 in Under 888 KiB
Build a tiny AI assistant on ESP32 with GPIO control, Telegram chat, scheduled tasks, and custom tools — all packed into 888 KiB firmware.

ESP32 E-Paper Weather Display: Build Guide (esp32-weather-epd)
Build a low-power E-Paper weather station with an ESP32, BME280 sensor, and OpenWeatherMap API. Runs 6–12 months on a single battery charge.

ESP32 Cheap Yellow Display (CYD): Complete Build Guide
Build projects with the ESP32-2432S028R Cheap Yellow Display — a $15 ESP32 board with a 2.8" touchscreen, Wi-Fi, and Bluetooth, no soldering needed.

ESP32-CAM_MJPEG2SD: Motion-Capture Camera with AVI Recording
Build a motion-triggered security camera on ESP32 that saves AVI video with audio to SD card and streams live MJPEG to a browser.

Sesame Robot: Build an ESP32 Mini Quadruped for $50–60
Step-by-step guide to building Sesame, an open-source 4-legged walking robot powered by ESP32, with an OLED face, WiFi API, and voice assistant support.