#esp-idf
16 open-source ESP32 project guides tagged #esp-idf: build steps, hardware and firmware.

ESP32 ST7789 Example: Drive the Display with ESP-IDF esp_lcd
Step-by-step ESP32 ST7789 example using the ESP-IDF esp_lcd driver: SPI bus setup, panel IO config, esp_lcd_new_panel_st7789, verification and common mistakes.

ESP32 DevKit V1: What It Is and How to Get Started
DOIT ESP32 DevKit V1 is built on the ESP32-WROOM module. Learn setup with Arduino IDE or ESP-IDF, pinout basics, and how to avoid common pitfalls.

ESP32-S3 AI Example: Build a Real-Time Voice Assistant
Step-by-step guide to building a real-time conversational AI on ESP32-S3 using LiveKit WebRTC, OpenAI Whisper, GPT-4o, and ElevenLabs TTS.

ESP32 DAC Example: Output Analog Voltage Step by Step
Learn how to use the ESP32's built-in 8-bit DAC on GPIO25 and GPIO26 with ESP-IDF. Covers one-shot, continuous DMA, and cosine wave modes.

ESP-IDF Examples: How to Find, Build, and Run Them
Step-by-step guide to finding, building, and flashing ESP-IDF example projects on ESP32, covering hello_world, Bluetooth, build setup, and common errors.

ESP32 Camera Example: Step-by-Step Setup Guide
Set up an ESP32 camera module from scratch: install the driver, configure AI Thinker pins, capture JPEG frames, and dodge the most common pitfalls.

ESP32 Wi-Fi Example: Connect to a Network Step-by-Step
Step-by-step ESP32 Wi-Fi tutorial for Arduino IDE and ESP-IDF. Learn station mode, common pitfalls, and how to verify a working connection.

ESP32 OTA Example: Update Firmware Over Wi-Fi Step-by-Step
A practical ESP32 OTA tutorial: partition setup, HTTPS OTA example code, rollback safety, and the most common mistakes to avoid.

ESP32 MQTT Example: Publish & Subscribe Step-by-Step
Step-by-step ESP32 MQTT tutorial covering setup, publish, subscribe, relay control, and common mistakes using ESP-IDF and Mongoose OS examples.

ESP32 Examples: Step-by-Step Setup and Run Guide
How to find, configure, flash, and verify ESP32 examples using ESP-IDF. Covers blink, WiFi softAP, HTTP server, TCP client, and combining projects.

Build an ESP32 Alexa Smart Speaker with I2S Audio
Turn an ESP32 into a working Alexa voice client using an I2S mic, I2S codec, and Neopixel status LEDs. Full wiring, pin table, and build steps.

OTA Update STM32 Over-the-Air Using ESP32
Use an ESP32 as a wireless programmer to flash STM32Fxx and STM32Gxx MCUs over-the-air via a browser-based file server.

ESP32-CAM A.I. Thinker: Camera Projects with ESP-IDF
Build camera projects with the ESP32-CAM A.I. Thinker and OV2640 sensor. Covers wiring, flashing, and four ready-to-run examples using PlatformIO.

MicroPython ESP32 psRAM LoBo: Build Firmware with 4MB RAM
Build feature-rich MicroPython firmware for ESP32 psRAM boards. Unlocks 4MB heap, TFT display, MQTT, FTP, SSH, GSM and OTA updates with the LoBo port.

NucleoOS: Web-Native OS with Offline AI for M5Stack Cardputer
Flash NucleoOS onto the M5Stack Cardputer for a full multi-app OS with offline AI, bilingual voice, a browser desktop shell, games, and a security lab.

TNY-360: Build an Open-Source Quadruped Robot Dog with ESP32-S3
Build the TNY-360, an open-source ESP32-S3 quadruped robot dog with 200Hz closed-loop servo control, a camera, IMU, and block-based programming support.